No Image

Силиконовый провод с медной жилой для авто

688 просмотров
21 января 2020

Как я и обещал, пишу продолжение эпопеи с ВВ (высоковольтными) проводами. Напомню, было заказано 2м ВВ провода Беру (код 0 300 800 021 — 1метр) для самостоятельного изготовления ВВ проводов.

Сопротивление проводов обычно колеблется около 4-6 кОм (килоОМ). Сделано для того чтобы убрать помехи в электр.оборудовании авто. Но свечи обычно тоже имеют сопротивление — производители перестраховываются. Из-за повыш.сопротивления теряется часть энергии подаваемая свече. Мне же, уже давно хотелось попробовать поездить на медных (т.к. если вы читали мой БЖ — у меня есть определенный бзик по этой теме). Был вариант колхоза с ЗИЛовскими проводами (да-да, от грузовика, но они не силиконовые), но читая инет наткнулся на вышеприведенный код проводов и уцепился. Был еще вариант тащить через ибей — но выходило дорого (дорогая доставка, дороже самих проводов).

Заказ шел долго, около месяца. Наконец получил — маленький пакетик, в котором были свернуты как попало провода. Удивился- не может быть чтобы тут было 2м. Развернул, сравнил со своим ростом (182) — выше меня, ну ладно. Мягкие — видимо реально силикон, гуд )

Чтобы собрать новый комплект, решил раздербанить старый комплект ВВ проводов от фокуса, благо у меня их несколько комплектов. Самое сложное — разобрать старый комплект. Советую, если решитесь повторить это, и у вас есть старый комплект, прежде чем заказывать провода, попробуйте разобрать хотя бы один провод. Лично мне было очень тяжело вытаскивать провода тонкогубцами за метал.наконечник из резинки, одеваемой на свечу. Рекомендую смазывать провод подручными материалами — чтоб трение об резинку не было таким сильным.

Good day. I did not write anything for a long time in connection with the observations. I would like to share my personal experience and my expenses. Well, let’s get started.
A year ago, I bought high-voltage wires of supposedly zero resistance to improve the spark. Photo

NEW Silicone high-voltage wires with "zero" resistance for VAZ 2101 — 2107

Benefits:
— The increased service life (a copper tinned vein (on a photo it is cleaned for descriptive reasons), high-quality silicone)
-Increasing spark power (starting the engine in frost, improving engine stability, improving the combustion range of the mixture)

Thanks to the copper core and almost “zero” resistance, these wires will transmit to the candle the most powerful spark from the coil without loss. It’s true, I confirm
A powerful spark (as a result of installing such wires) is able to provide such indicators as:
-efficient combustion of fuel. A powerful spark ignites all incoming fuel. Fuel does not fly into the pipe, but burns out, which will increase power. The maximum force on the piston develops. Bullshit, everything remained as it was, and actually half flew into the pipe. NOT TRUE
— the engine does not lose power and works more economically, lower toxicity Pizdezh
— eliminate interruptions and misfires caused by a weak spark. Not what it does not, Nonsense
-the launch in the cold is simplified True, there is a difference, it starts easier in the winter at — 15g. TRUTH
High-quality silicone insulator from a European manufacturer will ensure the reliability of wires for a long time.
Feedback on these wires.
I have the same wires, after installation the misfire disappeared (the engine stopped “throwing”), the idling became softer, the engine began to work more confidently in all modes.
In fact, complete Huynia, there wasn’t any difference, I’ll say with certainty that my jig did not want these wires.

Читайте также:  Рено сандеро степвей размер багажника

The advantages of these wires over silicone graphite wires:
In modern graphite silicone wires, the conductor is graphite filaments, thin … fragile. Therefore, they are not enough for long, often they break and work poorly (failures, troit, misfires).
But the main minus of graphite silicone wires is that they have different resistance, which greatly depends on the length of the wires. Often, even new wires may not fit into the tolerance range for resistance. This is something about 4-10kOhm. And the stronger the difference in resistance across the wires, the stronger the spark power across the cylinders. And accordingly, the difference in the developed force on the piston during combustion.
A complete analogue of wires from Nail Poroshin.

Now the conclusion is that in reality I got it.
Pyus
-Dynamics of acceleration improved, but not so noticeably.
— Starting is easier in winter.
— The view of the wires is beautiful.

Cons and here are the costs.
— The big minus is the big interference on the electronics, namely on the amplifier (It clicks constantly to the time of spark supply) I did all the possible manipulations on the radio and amplifier to get rid of interference. On the radio, the radio does not catch constant interference when the engine is running. I will shut down the engine all ok (The paradox is true)
— Interference on the switch, it does not work stably, the switch itself has changed more than once. I set the neighbor, the result, everything works fine for him, I put myself starting to junk after 2 minutes.
— The service life of candles with resistance is shortened, all 4 candles burned out.
— The runner on the ignition burned out. The paradox is some kind of pancake.
— Because of these wires, the charge on A.K. is buggy. watch the v >

Читайте также:  Time for regular maintenance 45

Yes, I almost forgot
In no case put in the ignition circuit all without resistance, there must be somewhere in the same resistance, either in candles or in wires. The combination of zero-resistance BB wires and candles without transistor is not permissible, the reason is the first, if everything stands without resistance, the spark will walk around all possible units and if you look under the hood at night there will be light music, and secondly, because of this, the 2nd amplifier burned out for subwoofer. and the engine sausage is not childish. I just decided to check the BB wires of zero resistance with candles without transistors. for 2 minutes. And that was the last straw to replace this shit called Zero Resistance Wire.

Anti-advertising
Silicone high-voltage wires with "zero" resistance for VAZ 2101 — 2107 will increase the spark and make it lightning, you want power under the hood slept all the machines change all electronics throw out all the wiring in FIG and leave only Silicone high-voltage wires with "zero" resistance for VAZ 2101 — 2107.
Something like this happened to me.

The choice is always yours. You decide. If you have a suggestion or decision regarding this article, write a comment.

Провод высоковольтный силиконовый ф 7 белый метражом

Силовые кабели 10 – 14 AWG: Медный провод 13AWG (1м кра.

Провод ПуВ 1*4 белый (ПВ1) Алюр

Кабель силовой 2х1,5 кв.мм медный гибкий с резиновой из.

AWG16 красный Провод медный многожильный в силиконовой.

Провод Севкабель ПВС 2х1.5мм2 ГОСТ 7399-97

Провод ПУСП/ПУНП QUEL 2х2,5 мм, 10 м

Читайте также:  Pub monitor exe что это

Провод ПУСП/ПУНП QUEL 2х1,5 мм, 50 м

NORD YADA провода пусковые 200А 2,5м Nord Yada CCA сили.

Кабель и Провод РЭК Провод ПУГВ белый 1 x 0,75 (в бухте.

Провод для одноцветной LED ленты 2*1,5мм2 в прозрачной.

Провод высоковольтный силиконовый ф 7 черный метражом

Провод соединительный ПВС Арзамасский кабельный завод 3.

Кабель силовой 3х1,5 кв.мм медный гибкий с резиновой из.

Провод высоковольтный силиконовый ф 5 красный метражом

Провод ПВС ККЗ гибкий медный ГОСТ белый 3х1.5 мм, 150 м

Силовые кабели 16 – 24 AWG: Медный провод 16AWG (1м кра.

провод электрический шввп 2х0,5 (5м) рт-кабель

Кабель КГ 2х1,5 мм2, гибкий, резиновая изоляция, черный.

Кабель силовой 2х0,75 кв.мм медный гибкий с резиновой и.

Провод REXANT ПВС 2х2.5 (10 м) ГОСТ

Провод Prysmian ПВС 3х2.5 (100 м) ГОСТ

Силовые кабели 2 – 8 AWG: Медный провод 8AWG (1м красно.

Кабель с резиновой изоляцией КГ 3х2.5 200 м

Провод силовой ПВ 1 (ПуВ) 1х1.5 медный ГОСТ

Провод высоковольтный силиконовый ф 7 синий метражом

Провод соединительный ПВС Калужский кабельный завод 2×1.

Провод ПУСП/ПУНП QUEL 2х2,5 мм, 5 м

Провод Севкабель ПВС 3×1.5мм2 ГОСТ 7399-97

14 AWG (AWG14) 2.08мм2 провод многожильный с силиконово.

Кабель силовой 1х25 кв.мм медный гибкий с резиновой изо.

Силовые кабели 16 – 24 AWG: Медный провод 16AWG (1м кра.

Кабель с резиновой изоляцией КГ 2х2.5 200 м

Кабель двухжильный "Альфакабель", медный, 2х1.

Кабель Prysmian ПВС 3х1.5 (100 м) ГОСТ

Силовые кабели 10 – 14 AWG: Медный провод 13AWG (1м кра.

Провод соединительный ШВВП Калужский кабельный завод 2x.

Россия Кабель питания ПВ1 (ПуВ) 1,5 (желто-зеленый)

Провод РЭК-PRYSMIAN 19207 ПВС 2х2.5 Б 100м

AWG16 черный Провод медный многожильный в силиконовой и.

Провод ПВС 5х1.5 ТУ

Кабель NYM 2х1,5 (100 м)

16 AWG (AWG16) 1.31мм2 провод многожильный с силиконово.

Комментировать
688 просмотров
Комментариев нет, будьте первым кто его оставит

Это интересно
No Image Автомобили
0 комментариев
No Image Автомобили
0 комментариев
No Image Автомобили
0 комментариев
Adblock
detector